added adapter to AnyWriter and GenericWriter to help bridge the gap
between old and new API
make std.testing.expectFmt work at compile-time
std.fmt no longer has a dependency on std.unicode. Formatted printing
was never properly unicode-aware. Now it no longer pretends to be.
Breakage/deprecations:
* std.fs.File.reader -> std.fs.File.deprecatedReader
* std.fs.File.writer -> std.fs.File.deprecatedWriter
* std.io.GenericReader -> std.io.Reader
* std.io.GenericWriter -> std.io.Writer
* std.io.AnyReader -> std.io.Reader
* std.io.AnyWriter -> std.io.Writer
* std.fmt.format -> std.fmt.deprecatedFormat
* std.fmt.fmtSliceEscapeLower -> std.ascii.hexEscape
* std.fmt.fmtSliceEscapeUpper -> std.ascii.hexEscape
* std.fmt.fmtSliceHexLower -> {x}
* std.fmt.fmtSliceHexUpper -> {X}
* std.fmt.fmtIntSizeDec -> {B}
* std.fmt.fmtIntSizeBin -> {Bi}
* std.fmt.fmtDuration -> {D}
* std.fmt.fmtDurationSigned -> {D}
* {} -> {f} when there is a format method
* format method signature
- anytype -> *std.io.Writer
- inferred error set -> error{WriteFailed}
- options -> (deleted)
* std.fmt.Formatted
- now takes context type explicitly
- no fmt string
The compiler actually doesn't need any functional changes for this: Sema
does reification based on the tag indices of `std.builtin.Type` already!
So, no zig1.wasm update is necessary.
This change is necessary to disallow name clashes between fields and
decls on a type, which is a prerequisite of #9938.
There were two primary issues at play here:
1. The hex float prefix was not handled correctly when the stream was
reset for the fallback parsing path, which occured when the mantissa was
longer max mantissa digits.
2. The implied exponent was not adjusted for hex-floats in this branch.
Additionally, some of the float parsing routines have been condensed, making
use of comptime.
closes#20275
The 64-bit backend supports printing all floats up to 64-bits. The
128-bit continues to be used for larger values.
This backend is approximately ~3x faster. Code size is a little smaller
in the full table case and much smaller if using the samll tables.
The implementation uses the same code-paths, parameterized by a set of
tables and their pow5 implementations. We continue to use the same
rounding/formatting mechanisms. Initially I explored a separate
implementation, as upstream does this and has specific optimizations for
these paths but for simplicity we don't. The performance loss is small
enough at this point and keeping them combined keeps them in sync.
Closes#19264.
Symmetry with parse_float and to hide the implementation from the user.
Additionally, we expose the entire namespace and provide some aliases so
everything is available to a user.
Closes#19366
This replaces the errol backend with one based on ryu. The 128-bit
backend only is implemented. This supports all floating-point types and
does not use fp logic to print.
Closes#1181.
Closes#1299.
Closes#3612.
Follow up to #19079, which made test names fully qualified.
This fixes tests that now-redundant information in their test names. For example here's a fully qualified test name before the changes in this commit:
"priority_queue.test.std.PriorityQueue: shrinkAndFree"
and the same test's name after the changes in this commit:
"priority_queue.test.shrinkAndFree"
Found while fuzzing. Previously 1.1897314953572317650857593266280070162E4932
was parsed as +inf, which caused issues for round-trip serialization of
floats. Only f128 had issues, but have added other tests for all
floating point large normals.
The max_exponent for f128 was wrong, it is subtly different in the
decimal code-path as it is based on where the decimal digit should go.
This needs to be 2 greater than the max exponent (e.g. 308 or 4932) to
work correctly (greater by 1, then we use a >= comparision).
In addition, I've removed the redundant `optimize` constant which was only
use for testing the slow path locally.
Use inline to vastly simplify the exposed API. This allows a
comptime-known endian parameter to be propogated, making extra functions
for a specific endianness completely unnecessary.
* 128-bit integer multiplication with overflow
* more instruction encodings used by std inline asm
* implement the `try_ptr` air instruction
* follow correct stack frame abi
* enable full panic handler
* enable stack traces
This reverts commit 0c99ba1eab, reversing
changes made to 5f92b070bf.
This caused a CI failure when it landed in master branch due to a
128-bit `@byteSwap` in std.mem.
At the moment, the LLVM IR we generate for this fn is
define internal fastcc void @AstGen.numberLiteral ... {
Entry:
...
%16 = alloca %"fmt.parse_float.decimal.Decimal(f128)", align 8
...
That `Decimal` is huuuge! It stores
pub const max_digits = 11564;
digits: [max_digits]u8,
on the stack.
It comes from `convertSlow` function, which LLVM happily inlined,
despite it being the cold path. Forbid inlining that to not penalize
callers with excessive stack usage.
Backstory: I was looking for needles memcpys in TigerBeetle, and came up
with this copyhound.zig tool for doing just that:
ee67e2ab95/src/copyhound.zig
Got curious, run it on the Zig's own code base, and looked at some of
the worst offenders.
List of worst offenders:
warning: crypto.kyber_d00.Kyber.SecretKey.decaps: 7776 bytes memcpy
warning: crypto.ff.Modulus.powPublic: 8160 bytes memcpy
warning: AstGen.numberLiteral: 11584 bytes memcpy
warning: crypto.tls.Client.init__anon_133566: 13984 bytes memcpy
warning: http.Client.connectUnproxied: 16896 bytes memcpy
warning: crypto.tls.Client.init__anon_133566: 16904 bytes memcpy
warning: objcopy.ElfFileHelper.tryCompressSection: 32768 bytes memcpy
Note from Andrew: I removed `noinline` from this commit since it should
be enough to set it to be cold.
Most of this migration was performed automatically with `zig fmt`. There
were a few exceptions which I had to manually fix:
* `@alignCast` and `@addrSpaceCast` cannot be automatically rewritten
* `@truncate`'s fixup is incorrect for vectors
* Test cases are not formatted, and their error locations change
The majority of these are in comments, some in doc comments which might
affect the generated documentation, and a few in parameter names -
nothing that should be breaking, however.
This reverts commit 3370d58956.
This commit was done with an LLVM build that did not have assertions
enabled. There are LLVM assertions being triggered due to this commit.
Reopens#10627Reopens#12013Reopens#12027
There are still a few occurrences of "stage1" in the standard library
and self-hosted compiler source, however, these instances need a bit
more careful inspection to ensure no breakage.
The previous float-parsing method was lacking in a lot of areas. This
commit introduces a state-of-the art implementation that is both
accurate and fast to std.
Code is derived from working repo https://github.com/tiehuis/zig-parsefloat.
This includes more test-cases and performance numbers that are present
in this commit.
* Accuracy
The primary testing regime has been using test-data found at
https://github.com/tiehuis/parse-number-fxx-test-data. This is a fork of
upstream with support for f128 test-cases added. This data has been
verified against other independent implementations and represents
accurate round-to-even IEEE-754 floating point semantics.
* Performance
Compared to the existing parseFloat implementation there is ~5-10x
performance improvement using the above corpus. (f128 parsing excluded
in below measurements).
** Old
$ time ./test_all_fxx_data
3520298/5296694 succeeded (1776396 fail)
________________________________________________________
Executed in 28.68 secs fish external
usr time 28.48 secs 0.00 micros 28.48 secs
sys time 0.08 secs 694.00 micros 0.08 secs
** This Implementation
$ time ./test_all_fxx_data
5296693/5296694 succeeded (1 fail)
________________________________________________________
Executed in 4.54 secs fish external
usr time 4.37 secs 515.00 micros 4.37 secs
sys time 0.10 secs 171.00 micros 0.10 secs
Further performance numbers can be seen using the
https://github.com/tiehuis/simple_fastfloat_benchmark/ repository, which
compares against some other well-known string-to-float conversion
functions. A breakdown can be found here:
0d9f020f1a/PERFORMANCE.md (commit-b15406a0d2e18b50a4b62fceb5a6a3bb60ca5706)
In summary, we are within 20% of the C++ reference implementation and
have about ~600-700MB/s throughput on a Intel I5-6500 3.5Ghz.
* F128 Support
Finally, f128 is now completely supported with full accuracy. This does
use a slower path which is possible to improve in future.
* Behavioural Changes
There are a few behavioural changes to note.
- `parseHexFloat` is now redundant and these are now supported directly
in `parseFloat`.
- We implement round-to-even in all parsing routines. This is as
specified by IEEE-754. Previous code used different rounding
mechanisms (standard was round-to-zero, hex-parsing looked to use
round-up) so there may be subtle differences.
Closes#2207.
Fixes#11169.
* unify the logic for exporting math functions from compiler-rt,
with the appropriate suffixes and prefixes.
- add all missing f128 and f80 exports. Functions with missing
implementations call other functions and have TODO comments.
- also add f16 functions
* move math functions from freestanding libc to compiler-rt (#7265)
* enable all the f128 and f80 code in the stage2 compiler and behavior
tests (#11161).
* update std lib to use builtins rather than `std.math`.
This also addresses a nit from #10133 where IntT might be a confusing
name because it might imply signed integer (iX, not uX). We settled on
TBits for math/float.zig so I've applied that change here too.
When I originally wrote ldexp() I copied the name from parse_hex_float.
